Unknown Ipc1-Im8130 Network Settings - imagistics ipc1-im8130 Administrator's Manual

Possible Cause
Printer port is not
configured
Jobs trapped in
Novell print queue
Different or
unreachable
network segment
Network Problems

UNKNOWN IPC1-IM8130 NETWORK SETTINGS

ipc1-im8130 Administrator's Guide
Cannot Print to
ipc1-im8130
Check
3 Have you configured a port for
the printer?
4 If you are using Novell print
services, did you setup the Novell
side of network printing, such as
creating print servers and
attaching the print queue?
5 If you set up Novell print services,
can you see the print job using
PCONSOLE or NWAdmin?
6 Have you checked the ipc1-
im8130's gateway and subnet
settings to make sure the ipc1-
im8130 is part of the same
network Gateway as the client
from which you are trying to
print?
7 Are other services and
communications performed over
the network behaving in the
normal and expected manner?
Problem Description
There are several ways you can check or change the current
network settings configured for the ipc1-im8130:
For
Instructions,
Yes No Go To...
→
Next ipc1-im8130
Step
Operator's Guide
↓
(Basic).
→
Setting Up
Next
Step
Novell Printing
↓
on page 153.
→
Refer to your
Next
Step
Novell
↓
PCONSOLE or
NWAdmin user
documentation
for help with
using these
utilities.
→
Configuring
Next
Step
TCP/IP Protocol
↓
Settings
page 49.
→
Refer to your
Next
Step
network
↓
documentation
or use a network
diagnostic utility
to research a
network problem.
on
311