General Ipc1-Im8130 Options - imagistics ipc1-im8130 Administrator's Manual

Option Alternate
Value Value
auto
pcl
postscript ps
raw
ipc1-im8130 Administrator's Guide
Title
The title that is printed on the banner page can be specified using
the "-t title" parameter with the "lp" command. The default value
is determined by the "lp" command and it is often the name of the
print file. If multiple files are printed using the same "lp"
command the default title is set to the name of the first file by the
"lp" command.

General ipc1-im8130 Options

The following options apply to all ipc1-im8130 print files.
Print Language
The "net_
ipc1im8130
language is used in each of the files that it is printing so that it can
issue the correct commands to select various options. The
following options are valid for the print languages.
Description
Each file to be printed is examined to see if it starts with
the "%!" sequence. If it does, then it is assumed that it is a
PostScript file, otherwise it assumes that it is a plain text
or a PCL5e file.
The print file is always treated as a plain text or a PCL5e
file.
The file is always treated as a PostScript file.
The file is treated as a fully formatted file that already
contains all the necessary commands. The file is sent to
the printer without any modifications. In this mode no
other options are valid and a banner page is not printed.
All PCL5e jobs automatically send the "<esc>&k2G" command
to convert the line-feed character into a carriage-return – line-
feed sequence. If the PCL5e job contains some of its own escape
sequences it may override this setting.
The default print language is "auto".
Example: The command to specify that a file is PostScript is
"lp –o ps filename".
" program needs to know what printer
181