Setting Up Appletalk Printing; Considerations And Limitations; Prerequisites; Configuring Appletalk - imagistics ipc1-im8130 Administrator's Manual

SETTING UP APPLETALK PRINTING

206

Considerations and Limitations

The ipc1-im8130 supports Macintosh printing over EtherTalk
only. TokenTalk is not supported.
Magazine sorting and saddle stitching features are not
supported.
Printing Microsoft Word documents that contain multiple
section breaks is not supported. The output stacking order is
incorrect and, if stapling is enabled, each section is stapled
individually.

Prerequisites

Macintosh
Operating System version 8.0, 8.5, 8.6, 9.0 or OS X
LaserWriter 8 printer driver
You can enable Macintosh printing remotely, by using Printer
Utility on the administrator's workstation, or locally, using
the copier's LCD touch screen.

Configuring AppleTalk

Set Protocol
1 Launch your Web browser. Open Printer Utility using the IP
address of the ipc1-im8130 controller you want to configure.
(Refer to Opening Printer Utility
Note: You can find the IP address by using ipc1-Document
Monitor.
2 Login as an Administrator.
3 Click the
Administration
4 Click the Setup submenu.
on page 215.)
tab.
ipc1-im8130 Administrator's Guide