imagistics ipc1-im8130 Administrator's Manual page 195

Option Alternate
Value Value
portrait
landscape
Option Alternate
Value Value
c pitch=16.67
10 pitch=10
12 pitch=12
pitch=value
ipc1-im8130 Administrator's Guide
If the option values specified are outside the indicated limits for
dpitch, dpointsize, dorientation, dformlines, dsymbolset, then
their respective default values are used.
Example: The command to set the default factory pitch to 10 is
"lp –o dpitch=10 filename".
Orientation
The following orientation options are available.
Description
Prints the document in portrait orientation.
Prints the document in landscape orientation.
If this option is not specified the command will not be sent so the
printer's default value will be used.
Example: The command to specify landscape orientation is "lp –o
landscape filename".
Font Pitch
If the pitch is specified the net_ipc1im8130 program will always
select the Courier font; otherwise the default font is used. The
following options are used to select the font pitch.
Description
Set the character pitch to 16.67 characters per inch.
Set the character pitch to 10 characters per inch.
Set the character pitch to 12 characters per inch.
Set the character pitch to value characters per inch.
In all the cases shown above the Courier font will also be
selected. When the pitch is changed the font size will
automatically be scaled to the appropriate size.
195