Restoring Default Protocol Settings - imagistics ipc1-im8130 Administrator's Manual

116
4 Select to enable AppleTalk.
Enable
This is the default setting.
5 Enter the AppleTalk Zone string.
.
6 Click
Save
7 Follow the instructions in
Settings on page 113.

Restoring Default Protocol Settings

You can restore the network settings to their default values.
Restoring the defaults returns the device to the state in which it
was delivered from the factory.
1 On the Administration tab, click the
2 Click the
Network
The Network page opens.
3 Click
Restore Defaults
4 Click .
Yes
5 Follow the instructions in
Settings on page 113.
Applying Changes to Protocol
Setup
link.
to restore the default settings.
Applying Changes to Protocol
ipc1-im8130 Administrator's Guide
subtab.