imagistics ipc1-im8130 Administrator's Manual page 184

Option Alternate
Value Value
punch=0 nopunch
punch=1
punch=2
punch=3
punch=4
184
Hole Punching
When the hole punch option is installed it can be activated
using the following option.
Description
Hole punching is turned off.
Hole punch long edge without rotation.
Hole punch short edge without rotation.
Hole punch long edge with 180° rotation.
Hole punch short edge with 180° rotation.
If this option is not specified, the default value of "nopunch" will
be used.
This function is not available for all paper sizes and the users
should refer to the copier manual for a list of compatible paper
sizes. In particular, A5, A6 and statement paper sizes will not
work with this function.
Example: The command to hole punch the long edge feed portrait
page is "lp –o punch=1 filename".
ipc1-im8130 Administrator's Guide