imagistics ipc1-im8130 Administrator's Manual page 71

116
. The
CONTROLLER
displayed:
5 Make sure the information displayed is correct. If not, press
to return to the
CANCEL
press to begin the controller update process. The status
OK
message now displays
When the update is complete, the CD-ROM is ejected and
Please remove the update CD from the CD-ROM
displays.
drive
6 Remove the CD-ROM and press
The controller reboots.
7 When communications with the copier resume, a test page
prints out on the copier and the front panel becomes
operational again. The controller software version printed on
the test page should match the actual update version. If so,
the system update has completed successfully.
If you experience problems during the update process, or if
the system does not come back online after the update
process completes, please contact your Imagistics authorized
dealer for support.
ipc1-im8130 Operator's Guide (Basic)
Controller Update Version
menu. If it is correct,
System Update
CONTROLLER UPDATE PROGRESS
.
OK
screen is
.