Printing To The Ipc1-Im8130 In Unix; Lp Command; Generic "Lp" And "Lptap" Options - imagistics ipc1-im8130 Administrator's Manual

PRINTING TO THE IPC1-IM8130 IN UNIX

180
banner="none"
The valid option to enter into the
is
banner="none"
With some of the options you have to set more than one
parameters in order for it to work correctly. For example, for
booklet printing, locate
booklet=letter | booklet=lt | booklet=LT )
booklet="LT"
booklet_paper="LETTER"
The valid option to enter into the <queue name>.conf file is
booklet="LT"
booklet_paper="LETTER"
The values stored in this file are case sensitive and they must
conform to the /bin/sh variable format.

LP Command

Use the command (
lp
ipc1-im8130 controller for printing. This command specifies
various printer-specific options using the
on the command line. The
options using various other parameters. Use the
net_ipc1im8130.1
describes the various options and parameters that can be set to
configure printed output.
All the options are sent to the ipc1-im8130 controller at the start
of a print job so, if the print file contains its own commands, they
may override the
lp

Generic "lp" and "lptap" Options

Copies
The number of copies of a print job is specified using the "-
n value" parameter with the "lp" command. The copy count
is displayed on the banner page. The default value is
determined by the "lp" command and it is always 1. The
copies are always collated.
<queue name>.conf
in Linux) to send a file to the
lpstat
command also sets other print
lp
command to view the online document that
options.
ipc1-im8130 Administrator's Guide
file
parameter
-o option
man