Client Setup - imagistics ipc1-im8130 Administrator's Manual

ipc1-im8130 Operator's Guide (Basic)
The Microsoft Client for NetWare may be used instead of
the Novell Client except for NDPS printers.
®
Windows 2000
Microsoft Windows
Novell Client v4.7 or higher with Z.E.N works Starter
Pack is required to run IPX-based SNMP access and
Novell printing.
The Microsoft Client for NetWare may be used instead of
the Novell Client except for NDPS printers.
Windows ® XP
Novell Client v4.82 or higher is required to run IPX-
based SNMP access and Novell printing.
The Microsoft Client for NetWare may be used instead of
the Novell Client except for NDPS printers.
At least 60 MB free disk space on the destination drive;
120 MB for optimal performance.
To ensure successful implementation:
If your workstation had a previous version of Imagistics
software installed, the setup program detects it and opens the
Client Setup Maintenance Program. Click
all previously installed components.
®
The Windows Add/Remove Programs option, accessible
from the Windows
software.
Close all Windows
software.
If an old version of Imagistics client software is installed,
right-click the document monitoring application icon in the
system tray, then choose

Client Setup

1 Insert the Imagistics im8130/im6530 ipc1-im8130 Client
CD-ROM into the workstation's CD-ROM drive. If Auto-
®
2000 Service Pack 1 or higher
® Control Panel, also deletes the old
®
applications before installing the new
from the short-cut menu.
Exit
to delete
Remove
37