Table of Contents
Advertisement
118
Configuring IPX/SPX Settings
1
On the Administration tab, click the
2
Click the
Wi-Fi Network
The Wi-Fi Network page opens.
3
In the IPX/SPX area, click the
4
Select
to enable IPX/SPX.
Enable
5
Click the
Frame Type
6
Select the appropriate setting.
7
Click
.
Save
Configuring TCP/IP Settings
1
On the Administration tab, click the
2
Click the
Wi-Fi Network
The Wi-Fi Network page opens.
3
In the TCP/IP area, click the
list.
4
Select either
Static IP
Note: If DHCP is selected, the IP Address, Subnet Mask and
Gateway fields aren't displayed.
5
Enter the IP address, subnet mask and gateway address if
appropriate.
6
Enter the address of the Primary DNS Server.
7
Enter the address of a Secondary DNS Server.
8
Continue with the instructions in
on page 118.
Configuring SMB Settings
1
On the Administration tab, click the
2
Click the
Wi-Fi Network
The Wi-Fi Network page opens.
3
In the SMB area of the Wi-Fi page, click the
down list.
4
Select
to enable the SMB protocol.
Enable
Setup
link.
drop-down list.
Protocol
drop-down list.
Setup
link.
IP Address Resolution
or
.
DHCP
Configuring SMB Settings
Setup
link.
ipc1-im8130 Administrator's Guide
subtab.
subtab.
drop-down
subtab.
drop-
Protocol
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the ipc1-im8130 and is the answer not in the manual?