Installing Ipc1-Im8130 Windows Printer Drivers; Adding Printers In A Windows Environment; Enabling Lpr/Lpd Printing - imagistics ipc1-im8130 Administrator's Manual

INSTALLING IPC1-IM8130 WINDOWS
ipc1-im8130 Operator's Guide (Basic)
The workstation may require rebooting before all
components, such as the program items from the Windows
Start menu, are removed.
®
Adding Printers in a Windows
Install ipc1-im8130 drivers as part of the InstallShield client
software setup process. Later, as required, add, re-install, or
update drivers in the following ways:
Run the Setup Program.
Use the ipc1-im8130 Client Setup Maintenance Program to
install selected drivers if you have the original or an updated
Imagistics ipc1-im8130 Client CD-ROM or can access it on a
network directory.
Download drivers from the controller.
Drivers are automatically downloaded pointing to the shared
printer on the ipc1-im8130 in a Microsoft Peer to Peer
environment. Similarly, if the ipc1-im8130 has been set up as
an NDPS printer, the drivers configured for the selected
Printer Agent are automatically downloaded.
Caution! This method may install outdated drivers if the
controller has not been updated with the most recent driver
software. For instructions, refer to
ipc1-im8130 in the
Install Drivers from Disk or Network Location.
Use the Add Printer Wizard to install driver software by
locating the driver's setup.inf file either on the Imagistics
ipc1-im8130 Client CD-ROM or in a primed network. This is
the method you must use if printing to a Novell, IPP, or LPD
queue. You must also configure a Microsoft port for the
printer.
These procedures are described in detail in the ipc1-im8130
Operator's Guide (Basic).

Enabling LPR/LPD Printing

To set up a client workstation for LPR printing:
PRINTER DRIVERS
®
environment
Download Drivers from the
ipc1-im8130 Operator's Guide (Basic).
®
39