imagistics ipc1-im8130 Administrator's Manual page 198

Option Alternate
Value Value
rm=value
Option Alternate
Value Value
tm=value
198
Right Margin
The right margin position can be specified with the following
option.
Description
Set the right margin to value columns.
If the right margin is set to the left of the left margin or if it is set
to a position wider than the logical page it will be ignored. The
right margin is specified in columns from the left margin. A
negative value will be ignored.
If this option is not specified the command will not be sent so the
printer's default value will be used.
Example: The command to set the right margin to fifty columns is
"lp –o rm=50 filename".
Top Margin
The top margin position can be specified with the following
option.
Description
Set the top margin to value lines.
If the top margin is set too high or too low part of the text may not
appear due to the printer's unprintable region. The top margin
will be ignored if it is set to a value greater than the printer's
logical page length. Setting this value may affect the number of
lines specified using the page length option.
If this option is not specified the command will not be sent so the
printer's default value will be used.
Example: The command to set the top margin to ten lines is "lp –
o tm=10 filename".
ipc1-im8130 Administrator's Guide