imagistics ipc1-im8130 Administrator's Manual page 66

ipc1-im8130 Operator's Guide (Basic)
When the controller finishes booting up, a process that takes
almost three minutes, the
displays:
If this screen does not display, the controller did not boot off
the CD successfully.
4 Press to continue. The controller begins copying the
OK
software from the CD to the hard disk drive (HDD). This
process takes approximately five minutes, during which time
the
OS Update Progress
5 When the system update process completes, the CD-ROM is
ejected and
Press the START key to start
displays.
controller
6 Remove the CD-ROM from the drive and press the
button. You must remove the CD-ROM before the controller
can boot up.
7 After boot up, an initialization process begins. This takes
approximately 10 minutes. During that time,
Controller update, don't switch off
8 When communications with the copier resume, a test page
prints out on the copier and the front panel becomes
operational again. The controller software version printed on
the test page should match the actual update version. If so,
the system update has completed successfully.
If you experience problems during the update process, or if
the system does not come back online after the update
Offline OS Update Version
screen displays.
screen
START
Processing
displays.
111