Uninstalling Client Software - imagistics ipc1-im8130 Administrator's Manual

38
Run is enabled, the InstallShield Setup Wizard starts
automatically.
Otherwise, choose
the Setup.exe file on the CD-ROM. Click
setup program.
2 Follow the Setup Wizard through the installation steps. When
prompted:
Enter a destination directory or accept the default loca-
tion.
Select the drivers and fonts to install.
Enter the network path to the printer or the queue name.
Select a program group or accept the default.
3 When the setup program finishes copying the necessary files
to your computer, it prompts to view the Readme file and
launch ipc1-Document Monitor. Deselect either or both
options, if desired, then click
Note: Only the Windows
automatically creates the printer port. If you are using the
®
Windows NT , Windows
operating system, you must manually create the printer
port after installing the printer drivers.

Uninstalling Client Software

1 If open, close the ipc1-Document Monitor application.
2 Insert the Imagistics ipc1-im8130 Client CD-ROM into the
CD-ROM drive. If Auto-Run is enabled, the InstallShield
Setup Wizard starts automatically.
Otherwise, choose
the Setup.exe file on the CD-ROM. Click
setup program.
The setup program automatically detects previously installed
versions and opens the Client Setup Maintenance Program.
3 Select to uninstall all previously installed ipc1-
Remove
im8130 components from the client workstation.
4 Follow the setup wizard to remove files from the workstation.
Click to exit the setup program.
Finish
ipc1-im8130 Operator's Guide (Basic)
from the Start menu and then locate
Run
to exit the Setup Wizard.
Finish
®
98/Me operating system
®
2000 or Windows
from the Start Menu and then locate
Run
to launch the
OK
®
XP
to launch the
OK