imagistics ipc1-im8130 Administrator's Manual page 69

114
8 When the system update process completes, the CD-ROM is
ejected and
Press the START key to start
displays.
controller
9 Remove the CD-ROM from the drive and press the
button. You must remove the CD-ROM before the controller
can boot up.
10 After boot up, an initialization process begins. This takes
approximately 10 minutes. During that time,
Controller update, don't switch off
11 When communications with the copier resume, a test page
prints out on the copier and the front panel becomes
operational again. The controller software version printed on
the test page should match the actual update version. If so,
the system update has completed successfully.
If you experience problems during the update process, or if
the system does not come back online after the update
process completes, please contact your Imagistics authorized
dealer for support.
ipc1-im8130 Operator's Guide (Basic)
START
Processing
displays.