Enabling/Disabling The Wi-Fi Card; Configuring Ipx/Spx Settings - imagistics ipc1-im8130 Administrator's Manual

142
You must configure the Wi-Fi protocols before end users can
access the Wi-Fi network.
By default, all network protocols are enabled.
You must be logged in as an administrator to set Wi-Fi network
protocol properties.

Enabling/Disabling the Wi-Fi Card

1 On the Administration tab, click the
2 Click the
Wi-Fi Network
The Wi-Fi page opens.
Sample Wi-Fi page
3 In the Device area, click the
4 Select
Enable or Disable
5 Click .
Save

Configuring IPX/SPX Settings

1 On the Administration tab, click the
2 Click the
Wi-Fi Network
Setup
link.
drop-down list.
Wi-Fi Card
.
Setup
link.
ipc1-im8130 Administrator's Guide
subtab.
subtab.