imagistics ipc1-im8130 Administrator's Manual page 199

Option Alternate
Value Value
auto-source
manual
upper cas1
lower cas2
tandem
external
pedupper cas3
pedlower cas4
inserter
Option
Value
tl=value
ipc1-im8130 Administrator's Guide
Paper Source
The current paper source can be specified using the following
options.
Description
Select auto paper tray selection.
Select the manual/bypass paper tray.
Select the upper paper tray.
Select the lower paper tray.
Select the tandem LCF paper tray.
Select the external paper tray.
Select the pedestal upper paper tray.
Select the pedestal lower paper tray.
Select the inserter bin.
In PostScript Deferred Media Selection is always turned on so the
paper size has priority over the paper source. In PCL5e the paper
size always has priority over the paper source.
If this option is not specified the command will not be sent so the
printer's default value will be used.
Example: The command to specify the LCF paper source is "lp –
o lcf filename".
Text Length
The text length can be specified with the following option.
Alternate Description
Value
Set the text length to value lines.
If the text length is set too high part of the text may not appear
due to the printer's unprintable region. The text length will be
ignored if it is set to a value greater than the printer's logical page
199