Cannot View Job In Ipc1-Document Monitor Print Queue - imagistics ipc1-im8130 Administrator's Manual

232
Rebooting procedure if all else fails
If you can't reboot the preferred way, do the following:
1 Press
PRINTER/NETWORK,
10 seconds
.
2 Press .
START
The controller reboots.
Warning! Do NOT reboot the controller unless absolutely
necessary. Any job currently being processed will be lost
during the rebooting process.
Cannot View Job in ipc1-Document Monitor Print
Queue
Problem Description
After submitting a job to print, there are several reasons why you
may not see the job in the print queue:
Wrong device selected.
The job is queued on the Windows
spooler.
The job may be held in the Novell print queue.
A copier error prevents printing.
Corrective Action
Check the device location to see if there really should be any
jobs listed.
Check the Jobs Log in Printer Utility to see if the status of the
job is listed as Done, Deleted, or Unserviceable.
If the job is very small, it may have already been serviced and
moved to the Jobs Log as a terminated job. If the job was
unserviceable for some reason, it no longer appears in the
under Current Jobs list.
Look at the copier's control panel LCD for error messages.
For instance, a prompt to load paper holds up subsequent jobs
in the queue.
ipc1-im8130 Operator's Guide (Basic)
holding down the button for at least
®
operating system print