LCD Message
Set staple cartridge of
saddle stitch unit
Time for periodic
maintenance
USE GENUINE Imagistics
TONER
WAIT
Wait adding toner
Message
Canceled
Completed
Controller Authentication Sig-
nature Not Found
Deleted
300
Message Log Error Messages (Continued)
Printer Utility
Message
Set staple cartridge of
saddle stitch unit
Time for periodic
maintenance
Use genuine
Imagistics Toner
Wait - Self
maintenance
Wait - Adding toner
Jobs Log
The following messages may appear in the Status column of the
Jobs Log. The table indicates the probable cause and the action
you can take to resolve the error. If the error condition persists,
contact your Imagistics authorized dealer for support.
Jobs Log Status Messages
Cause
Job was cancelled by
the administrator or
the end user.
Job printed
successfully.
Problem locating or
communicating with
the controller.
Job was deleted by
the administrator or
the end user.
Corrective Action
Set the staple cartridge of the
saddle stitch unit.
Time for periodic maintenance.
Contact your Imagistics authorized
dealer for support.
Check and adjust the toner bottle.
Please wait - Self maintenance in
progress.
Wait - Adding toner.
Corrective Action
Resubmit the job.
No action required.
Reboot the controller from the
copier's control panel or by using
Printer Utility.
Resubmit the job.
ipc1-im8130 Administrator's Guide
Need help?
Do you have a question about the ipc1-im8130 and is the answer not in the manual?