imagistics ipc1-im8130 Administrator's Manual page 201

Auto paper source selection or the requested banner page source
or media type.
Output bin as requested by the "-o" parameter or the printer
default value.
6 lines per inch
Auto-wrap on.
Automatic carriage-return when a line-feed is sent.
The banner page is designed to fit Statement / A5 and bigger
paper. If the paper selected is smaller, the banner page may wrap
onto two (2) pages.
The default is that the banner page is printed before the job so that
it is in the correct stacking order.
When the language is set to "raw" the banner is always disabled.
The paper source and the media type for the banner page can be
set to different values than the job's paper source and media type.
If a banner paper source is not specified then the auto source
command is sent. If a banner media type is not specified then no
banner media type command is sent, so the printer's default value
will be used.
If the file being printed specifies the paper destination or the
paper size internally the banner page may print to the wrong
output or on an incorrect paper size.
201
ipc1-im8130 Administrator's Guide