imagistics ipc1-im8130 Administrator's Manual page 245

246
3 Type in or edit the last and first names. Each may be no more
than 32 characters.
4 Type in or edit the email address, which is limited to 90
characters.
5 To add the contact to a group, click the group(s) in the group
display.
If a group is not selected, the contact's address appears in the
"Undefined" list of addresses. These are not assigned to any
group.
6 Click to save the new or edited address.
OK
7 If adding, click
Reset
re-enter the contact information.
8 Type in the last name, first name and required email address.
9 Click .
OK
Printer Utility adds the recipient to the distribution list.
10 Repeat these steps until you complete your recipient list.
to clear all the field entries so you can
ipc1-im8130 Administrator's Guide