Setting Wi-Fi Network Protocol Properties - imagistics ipc1-im8130 Administrator's Manual

SETTING WI-FI NETWORK PROTOCOL PROPERTIES

ipc1-im8130 Administrator's Guide
7 Press the down arrow to adjust the Transmit Power settings.
Sample Transmit Power settings
8 Select the required power value.
9 Press the down arrow to complete the Wi-Fi NIC settings.
Sample Wi-Fi NIC settings
10 Press to save your settings.
OK
The Administration > Setup > Wi-Fi Network page allows you to
set up the protocols used by client workstations to communicate
with the network via the Wi-Fi NIC installed in the controller.
141