Configuration For Ic Card Reader (Optional); Step 1 Preparations; Step 2 Logout Method Using The Smart Card - Fuji Xerox ApeosPort-IV C7780 Administrator's Manual

14 Authentication and Accounting Features

Configuration for IC Card Reader (Optional)

You can use a smart card for authentication by comparing the information registered
on the smart card and the user information on the machine. You can also restrict the
machine use and perform accounting of the jobs using the information registered on
the smart card.
This section describes the supported smart cards and how to register a smart card to
use at the machine.
Note
The following shows the reference section for card information and each procedure.

Step 1 Preparations

The following smart card types are supported by the embedded IC Card Reader.
*: The embedded IC Card Reader of the machine may not support some smart cards.

Step 2 Logout Method Using the Smart Card

Perform the following steps to set how to logout authentication using the smart card.
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with the numeric keypad or the keyboard
14
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's
passcode, and select [Enter].
Note
3
Select [Tools] on the [Services Home] screen.
4
Select [Authentication/Security Settings].
5
Select [Authentication].
6
Select [User Details Setup].
412
• An optional component is required to use this feature. For more information, contact our
Customer Support Center.
Step 1 Preparations....................................................................................................................412
Step 2 Logout Method Using the Smart Card...........................................................................412
Step 3 Registering Smart Card Information..............................................................................413
®
MIFARE (Type A)
- Fuji Xerox IC Card (Type A)
- Other MIFARE compatible smart cards*
eLWISE/ELWISE (Type B)
- eLWISE
- ELWISE
®
FeliCa
- Fuji Xerox IC Card
- IC Card compatible with SSFC version 1.0 format
- Other FeliCa compatible smart cards*
• The default user ID is "11111".
• The default passcode is "x-admin".