Fcs-Lens Focus Position Adjustment; Fib-Christie Link Video Mode - Christie Mirage SST Technical Reference

Result:
(EVT!000 "2013-03-17 04:47:18.340" "OK" "Setting Time to 06:47:17")
(EVT!002 "2013-03-17 04:01:13.855" "Error" "(SST+TEMP?002) Air Intake Temperature
(Temp 2) = Communication fault (shutdown)")
(EVT!003 "2013-03-17 04:01:13.824" "Error" "(SST+TEMP?000) Integrator Rod Temperature
(Temp 1) = Communication fault (shutdown)")
(EVT!"--END--")
Retrieve all events between two specific points in time:
(EVT "2013-03-17 04:01:08" "2013-03-17 04:01:12")
Result:
(EVT!004 "2013-03-17 04:01:12.663" "Error" "(SST+TEMP?000) Integrator Rod Temperature
(Temp 1) = Communication fault (shutdown)")
(EVT!"--END--")
FCS–Lens Focus Position Adjustment
Sets the lens focus to an absolute position.
This command is only enabled when the projector is on.
Commands
Command Description
FCS <position> Adjusts the lens focus to the specified position.
Examples
Move lens focus to position 500:
(FCS 500)
FIB–Christie Link Video Mode
Enables or disables the Christie Link video input.
Commands
Command Description
FIB+SLTA <0 | 1> Enables or disables the Christie Link video
input on the option card in slot 0. When
enabled, other inputs (on the HBMIC) are
inactive.
Mirage SST Technical Reference–Serial Commands
020-103005-03 Rev. 1 (01-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
position = A numeric value
subject to the range
returned in FCS?m
Values
0 = Disables Christie Link video input
(Default)
1 = Enables Christie Link video input
33