6. Periodical check
6.5.17
Cleaning of the image transfer entrance guide
A. Periodically cleaning parts/cycle
• Image transfer entrance guide: When the transfer belt unit is replaced
B. Procedure
1. Remove the transfer belt unit.
See P.40
[1]
6.5.18
Cleaning of the IDC/registration sensor/MK,YC
A. Periodically cleaning parts/cycle
• IDC/registration sensor/MK,YC: When the transfer belt unit is replaced
B. Procedure
1. Remove the transfer belt unit.
See P.40
[1]
42
(every 150,000 print)
2. Wipe the image transfer entrance
A02EF2C034DA
(every 150,000 print)
2. Wipe the surface of the IDC/registra-
A02EF2C035DA
Field Service Ver. 1.0 Oct. 2007
guide [1] clean of spilled toner and
dirt using a cleaning pad with water
or alcohol.
tion sensor/MK,YC [1] clean of
spilled toner and dirt using a cotton
bud.