Administrator Password Function; Setting The Administrator Password - Konica Minolta bizhub 4750 Service Manual

8. Service Mode functions
8.2

Administrator Password function

• This function is used when the administrator sets the administrator password. It also
allows a new administrator password to be set without requiring the entry of the currently
set administrator password. It is therefore used when the administrator forgets the
administrator password.
NOTE
• If the administrator password is temporarily changed by the service engineer,
never fail to have the administrator change the administrator password accord-
ingly.
8.2.1

Setting the administrator password

1. Call the Service Mode to the screen.
See P.4
2. Touch [Keypad].
3. Press the following keys in this order to display the Enhanced Security screen:
Stop → 2 → 2 → 2 → 0 → 0
4. Touch [Administrator Password].
5. Touch the input area of [Password] and enter the default value "12345678" as the new
password from the keyboard on the screen. Then, touch [OK].
NOTE
• Use the default value "12345678" as the password used only temporarily.
6. Touch the input area of [Password Confirmation] and enter the new administrator pass-
word (the default value "12345678") once again and touch [OK].
10
Security Function Ver. 1.01 Sep. 2014
A6F7S1E004DA
A6F7S1E005DA