Blank Margin
If the leading edge/side-to-side registration cannot be adjusted within the
specifications, adjust the leading/left side edge blank margin.
1.
Check the trailing edge and right side edge blank margins, and adjust them using the
following SP modes.
Trailing edge
Right edge
Leading edge
Left edge
Trailing edge (duplex
copy, 2nd side)
Left edge (duplex copy,
2nd side)
Right edge (duplex
copy, 2nd side)
D017/D018/D019/D020/D084/D085
SP mode
Specification
SP2-101-2/3/4
3 ± 2 mm
SP2-101-6
2 +2.5/-1.5 mm
SP2-101-1
3 ± 2 mm
SP2-101-5
2 ± 1.5 mm
SP2-101-7
2 ± 2 mm
SP2-101-8
2 ± 1.5 mm
SP2-101-9
2 +2.5/-1.5 mm
4-73
Copy Adjustments: Printing/Scanning
SM