Ricoh D017 Service Manual page 61

4. Enable the NIB and/or USB function.
To enable the NIB function, enter the SP mode and set SP5985-001 (On Board
NIC) to "1"(Enable).
To enable the USB function, enter the SP mode and set SP5985-002 (On Board
USB) to "1"(Enable).
5. Exit SP mode.
6. Do some test copies to make sure that the machine operates correctly.
App 2 Me Setting (D084/D085 only)
D084/D085 modes have VM Card including "App 2 Me" provider by default. Do the following
procedure if a customer want to use the "App 2 Me".
1. Press "User Tools" key on the operation panel.
2. Touch the "Extended Feature Settings" button twice.
3. Touch the "App 2 Me" line in the Startup Setting tab.
4. Touch the "Extended Feature Info" tab on the LCD.
5. Touch the "App 2 Me" line.
6. Set the setting of "Auto Start" to "On".
7. Touch the "Exit" button.
8. Exit the "User Tools" settings.
Update Procedure for App 2 Me Provider
1. Push the "User/Tools" key.
2. If an administrator setting is registered for the machine, step 2 and 3 are required.
Otherwise, skip to step 4.
3. Push the "Login/Logout" key.
4. Login with the administrator user name and password.
5. Touch "Extended Feature Settings" twice on the LCD.
6. Touch the each application. Then, the status will be changed to "Stop".
7. Turn off the machine. And then remove the VM Card.
D017/D018/D019/D020/D084/D085 2-15
Copier Installation
SM