Ricoh D017 Service Manual page 615

System SP Tables-8
A job is counted as a fax job when the job is stored for sending.
When a fax is received to fax memory, the F: counter increments but the L: counter
does not (the document server is not used).
A fax broadcast counts as one job for the F: counter (the fax destinations in the
broadcast are not counted separately).
A fax broadcast is counted only after all the faxes have been sent to their destinations.
If one transmission generates an error, then the broadcast will not be counted until the
transmission has been completed.
A printed fax report counts as one job for the F: counter.
The F: counter does not distinguish between fax sending or receiving.
When a copy job on the document server is printed, SP8022 also increments, and
when a print job stored on the document server is printed, SP8024 also increments.
When an original is both copied and stored on the document server, the C: and L:
counters both increment.
When a print job is stored on the document server, only the L: counter increments.
When the user presses the Document Server button to store the job on the document
server, only the L: counter increments.
When the user enters document server mode and prints data stored on the document
server, only the L: counter increments.
When an image received from Palm 2 is received and stored, the L: counter
increments.
When the customer prints a report (user code list, for example), the O: counter
increments. However, for fax reports and reports executed from the fax application, the
F: counter increments.
8011 T:Jobs/LS
8012 C:Jobs/LS
8013 F:Jobs/LS
8014 P:Jobs/LS
8015 S:Jobs/LS
8016 L:Jobs/LS
8017 O:Jobs/LS
D017/D018/D019/D020/D084/D085
These SPs count the number of jobs stored to the
document server by each application, to reveal how
local storage is being used for input.
[0 to 9999999/ 0 / 1]
The L: counter counts the number of jobs stored
from within the document server mode screen at the
operation panel.
4-182 SM Appendix