Ricoh D017 Service Manual page 539

System SP Tables-5
250 CommLog Print
5821 Remote Service Address Japan Only
1 CSS PI Device Code
2 RCG IP Address
NVRAM Data Upload
5824
Uploads the NVRAM data to an SD card (B140). Push Execute.
Note: When uploading data in this SP mode, the front door must be open.
NVRAM Data Download
Downloads data from an SD card to the NVRAM in the machine. After
5825
downloading is completed, remove the card and turn the machine power off
and on.
5828 Network Setting
1 IPv4 Address (Ethernet/IEEE 802.11)
This SP allows you to confirm and reset the IPv4 address for Ethernet and a
wireless LAN (802.11):
aaa.bbb.ccc.ddd
For example, if the 8-bit entry is "192.168.000.001" this is read
"0C0A80001h"
D017/D018/D019/D020/D084/D085
Prints the communication log.
Sets the PI device code. After you change this
setting, you must turn the machine off and on.
Sets the IP address of the RCG (Remote
Communication Gate) destination for call
processing at the remote service center.
[00000000htoFFFFFFFFh/1]
4-106 SM Appendix