Table of Contents
Advertisement
COPY ADJUSTMENT
Blank Margin
NOTE: If the leading edge/side-to-side registration cannot be adjusted within the
specifications, adjust the leading/back side edge trim margin.
1. Check the trailing edge and front side edge blank margins, and adjust them
using the following SP modes.
Trailing edge
Front edge
Leading edge
Back edge
Main Scan Magnification
1. Print the single-dot grid pattern (SP5-955-1, No.5).
2. Check the magnification, and adjust the magnification using SP2-100-1 if
necessary. The specification is ±1%.
SP mode
Specification
3 ± 2 mm
SP2-101-4
SP2-101-1
2 +2.5/-1.5 mm
3 ± 2 mm
SP2-101-3
2 ± 1.5 mm
SP2-101-2
3-60
10 February 2005
D
C
A: Trailing Edge Blank Margin
B: Right Edge Blank Margin
C: Leading Edge Blank Margin
D: Left Edge Blank Margin
A
B
B156R292.WMF
Advertisement
Table of Contents
