SP1-001-001 (All Trays)
SP1-001-002 (By-pass)
SP1-001-003 (Duplex)
5. Adjust the leading edge registration (SP1-001).
6. Measure the distance between the side edge of the image area and the side edge of the paper [B].
SP1-002-001 (1st tray)
SP1-002-002 (2nd tray)
SP1-002-003 (3rd tray)
SP1-002-004 (By-pass)
SP1-002-005 (Duplex)
7. Adjust the side-to-side registration (SP1-002).
8. Select "Cancel" in SP2-109-001 after finishing the adjustment procedure.
Adjusting Blank Margin
Use the Trimming Area Pattern (SP2-109-001 > 10) for this adjustment.
1. Print out the test pattern.
2. Measure the distance between the four edges of the image area and the four edges of the paper
[A][B][C][D].
SP
SP
Adjusting Copy Image Area
Specification
0 ± 2 mm
0 ± 2 mm
0 ± 4 mm
Specification
0 ± 2 mm
0 ± 2 mm
0 ± 2 mm
0 ± 4 mm
0 ± 4 mm
135