Ricoh D017 Service Manual page 908

Bit Switches - 1
No Function
0-5 Not used
Extended scanner page
memory after memory option is
6 installed
0: Disabled
1: Enabled
Special Original mode
7 0: Disabled
1: Enabled
No Function
0 LS RX memory capacity
to threshold setting
7 00-FF (0-1020 Kbyte: Hex)
System Switch 1B - Not used (do not change these settings)
System Switch 1C - Not used (do not change these settings)
D361/D510
System Switch 19 (SP No. 1-101-026)
Do not change the settings.
0: After installing the memory expansion option,
the scanner page memory is extended to 4 MB
from 2 MB.
1: If this bit is set to 1 after installing the
memory expansion option, the scanner page
memory is extended to 12 MB. But the SAF
memory decreases to 18 MB.
1: If the customer frequently wishes to transmit
a form or letterhead which has a colored or
printed background, change this bit to "1".
"Original 1" and "Original 2" can be selected in
addition to the "Text", "Text/Photo" and "Photo"
modes.
System Switch 1A (SP No. 1-101-027)
Sets the value to x4KB. When the amount of
available memory drops below this setting, RX
documents are printed to conserve memory.
Initial setting 0x80 (512 KB)
90
Comments
Comments
SM