Switching Between Sp Mode And Copy Mode For Test Printing; Selecting The Program Number - Ricoh D017 Service Manual

SP Mode if it is not highlighted.)
[5] Press twice to leave the SP mode and return to the copy window to resume normal
operation.
[6] Press any Group number to open a list of SP codes and titles for that group. For
example, to open the SP code list for SP1nnn, press Group1. If an SP has sublevels,
touch the appropriate button to expand the list.
[7] Press to scroll the display to the previous or next group.
[8] Press to scroll to the previous or next display in segments the size of the screen
display (page).
[9] Press to scroll the display to the previous or next line, line by line.
[10] Press to move the highlight on the left to the previous or next selection in the list.

Switching Between SP Mode and Copy Mode for Test Printing

1. In the SP mode, select the test print and then press Copy Window.
2. Use the copy window (copier mode), to select the appropriate settings (paper size, etc.)
for the test print.
3. Press the Start button to execute the test print.
4. Press SP Mode (highlighted) to return to the SP mode screen and repeat from step 1.

Selecting the Program Number

Program numbers have two or three levels.
1. Before you begin, refer to the Service Tables to find the SP that you want to adjust. (See
"Service Program Mode Tables".)
2. Press the Group number on the left side SP Mode window that contains the SP that you
want to adjust.
3. Use the scrolling buttons in the center of the SP mode window to display the SP number
that you want to open, and then press that number to expand the list.
4. Use the center touch-panel buttons to scroll to the number and title of the item that you
want to set and press. The small entry box on the right is activated and displays the
default or the current setting below.
D017/D018/D019/D020/D084/D085 5-3
Service Program Mode
SM