Ricoh D017 Service Manual page 452

2901* Separation Voltage Adj
Front – Leading Edge
Adjusts the voltage that is applied to the separation plate during printing at
1
the leading edge of the paper on the front side.
If the copies have pawl marks at the leading edge, increase this voltage.
[–4000 to –1000 / –1800 / 1 V/step]
Front – Image Area
Adjusts the voltage that is applied to the separation plate during printing on
2
the image area of the paper on the front side.
If the copies have pawl marks in the image area, increase this voltage.
[–4000 to –1000 / –1800 / 1 V/step]
Rear – Leading Edge
Adjusts the voltage applied to the separation plate, during printing at the
3
leading edge of the paper on the rear side.
See SP2901 1.
[–4000 to –1000 / –2100 / 1 V/step]
Rear – Image Area
Adjusts the voltage applied to the separation plate, during printing at the
4
image area of the paper on the rear side.
See SP2901 2.
[–4000 to –1000 / –2100 / 1 V/step]
2902* Test Pattern
Prints the test patterns. Select the number of the test pattern that you want to
print. When adjusting the printing registration, select no.10 (Trimming Area
Pattern). [0 to 24 / 0 / 1 step]
SM Appendix 4-19 D017/D018/D019/D020/D084/D085
System SP Tables-2