Controller Options
Installation
Turn off the main power switch and disconnect the power supply cord.
1.
Remove the plastic application cover (
2.
Remove the cover [A] of board slot (
3.
Attach the interface board [B] to the controller board (
Use a screwdriver to tighten the knob-screws. Do not tighten manually,
because this can disconnect the board.
4.
Install the Bluetooth card [C] in the slot in the Bluetooth unit.
5.
Insert the antenna [D] into the Bluetooth card.
6.
Attach the antenna cap [E].
SM
x1).
x1).
x2 knob screws).
2-98
D017/D018/D019/D020/D084/D085