Ricoh D017 Service Manual page 164

Controller Options
4. Remove the application cover [A] (
5. Insert the IPDS SD Card [B] into Slot C1.
If Slot C1 is occupied, insert it in to Slot C2, then merge this application into the SD
card in Slot C1.
Pushing in the SD Card releases it for removal. Make sure the SD Card is
inserted and locked in place. If it is partially out of the slot, push it in gently until
it locks in place.
6. Reattach the cover and turn ON the main switch.
7. Do one of the following ("A" or "B") to enable the IPDS function.
A. [Enable the IPDS function via telnet]
1. Connect the machine via telnet.
2. Execute the following commands:
msh> set ipds up
***If you want to stop the function.
msh> set ipds down
B. [Enable the IPDS option via WebImageMonitor]
1. Log in to WebImageMonitor.
2. Change the setting to enable IPDS.
SM
x 1).
2-118 D017/D018/D019/D020/D084/D085