Ricoh D017 Service Manual page 527

System SP Tables-5
5812 Service Tel. No. Setting
1 Service
2 Facsimile
3 Supply
4 Operation
5816 Remote Service
I/F Setting
Selects the remote service setting.
[0 to 2 / 2 / 1 /step]
001
0: Remote service off
1: CSS remote service on
2: @Remote service on
CE Call
Performs the CE Call at the start or end of the service.
[0 or 1 / 0 / 1 /step]
002
0: Start of the service
1: End of the service
NOTE: This SP is activated only when SP 5816-001 is set to "2".
Function Flag
Enables or disables the remote service function.
[0 to 1 / 0 / 1 /step]
003
0: Disabled, 1: Enabled
NOTE: This SP setting is changed to "1" after @Remote registor has been
completed.
D017/D018/D019/D020/D084/D085
Inputs the telephone number of the CE (displayed when a
service call condition occurs.)
Use this to input the fax number of the CE printed on the
Counter Report (UP mode). Not Used
Displayed on the initial SP screen.
Allows the service center contact telephone number to be
displayed on the initial screen.
4-94 SM Appendix