Ricoh D017 Service Manual page 984

NCU Parameters
Address
680565 Long distance call prefix (HIGH) BCD
680566 Long distance call prefix (LOW)
680567
to Not used
680571
Acceptable ringing signal
680572
frequency: range 1, upper limit
Acceptable ringing signal
680573
frequency: range 1, lower limit
Acceptable ringing signal
680574
frequency: range 2, upper limit
Acceptable ringing signal
680575
frequency: range 2, lower limit
Number of rings until a call is
680576
detected
Minimum required length of the
680577
first ring
Minimum required length of the
680578
second and subsequent rings
Ringing signal detection reset
680579
time (LOW)
Ringing signal detection reset
68057A
time (HIGH)
D361/D510
Function
166
Unit
For a code of 0:
680565 - FF
BCD
680566 - FF
Do not change the
settings.
SP2-103-003 (parameter
02).
SP2-103-004 (parameter
03).
1000/ N (Hz).
SP2-103-005 (parameter
04).
SP2-103-006 (parameter
05).
SP2-103-007 (parameter
06).
1
The setting must not be
zero.
See Note 4.
20 ms SP2-103-008 (parameter
07).
SP2-103-009 (parameter
20 ms
08).
SP2-103-010 (parameter
09).
20 ms
SP2-103-011 (parameter
10).
Remarks
SM