Ricoh D017 Service Manual page 580

Sheet Through Magnification
6017
Adjusts the magnification in the sub-scan direction for the ARDF.
[-5.0 to 5.0 / 0 / 0.1 %/step]
Finisher Input Check
6117
Displays the signals received from finisher sensors and switches. (See the
tables below.)
1 Group 1
2 Group 2
3 Group 3 (Only 1000 Fin)
4 Group 4 (Only 1000 Fin)
Check the status of each item against the 8-digit bit display listed in the table below.
Number Bit
Stack Feed-out Belt HP
7
Sensor
6 Not Used
5 Jogger Fence HP Sensor
4 Stapler HP Sensor
Group 1
3 Stapler Tray Entrance Sensor Activated
2 Not Used
1 Lower Tray Exit Sensor
0 Entrance Sensor
SM Appendix
Description
Activated
Activated
Activated
Activated
Activated
4-147
System SP Tables-6
Reading
0 1
Deactivated
Deactivated
Deactivated
Deactivated
Deactivated
Deactivated
D017/D018/D019/D020/D084/D085