Ricoh D017 Service Manual page 849

Code Meaning
6-09 G3 ECM - ERR received
G3 ECM - error frames
still received at the other
6-10 end after all
communication attempts
at 2400 bps
V.21 flag detected during
6-21 high speed modem
communication
The machine resets the
sequence because of an
6-22
abnormal handshake in
the V.34 control channel
V.21 signal not stopped
6-99
within 6 s
SIP user name
13-17
registration error
13-18 SIP server access error
13-24 SIP authentication error
SM
Suggested Cause/Action
Check for a noisy line.
Adjust the tx levels of the communicating
machines.
See code 6-05.
Check for line noise.
Adjust the tx level (use NCU parameter 01 or
the dedicated tx parameter for that address).
Check the line connection.
Defective remote terminal.
The other terminal may be defective or
incompatible.
Check for line noise.
If the same error occurs frequently, replace the
FCU.
Defective remote terminal.
Replace the FCU.
Double registration of the SIP user name.
Capacity for user-name registration in the SIP
server is not sufficient.
Incorrect initial setting for the SIP server.
Defective SIP server.
Registered password in the device does not
match the password in the SIP server.
31
Error Codes
D361/D510