Ricoh D017 Service Manual page 149

"Available Settings" is not displayed until "Admin. Authentication" is switch on.
If this setting is not selected tell the customer that this setting must be selected before
you can do the installation procedure.
4. For models which have the VM card, do the followings:
Press "User Tools" button to enter the User Tools mode.
Press "Extended Feature Settings" on the LCD.
Press "Extended Feature Settings" on the LCD again.
Press "Startup Setting" tab.
Stop all SDK applications with touching application lines.
D017/D018/D019/D020/D084/D085 2-103
Controller Options
SM