Memory All Clear (Sp) - Ricoh D017 Service Manual

Service Program Mode
Memory All Clear (SP5801)
Executing Memory All Clear resets all the settings stored in the NVRAM to their default
settings except the following:
SP2989 1-5: PCU ID (South Korea Only)
SP2990 1-5: Original Toner ID (South Korea Only)
SP2991 1-5: Original Toner Counter (South Korea Only)
SP5811 1: Machine serial number
SP5907: Plug & Play Brand Name and Production Name Setting
Normally, this SP mode should not be used. This procedure is necessary only after replacing
the NVRAM, or when the copier malfunctions because the NVRAM is damaged.
1. Enter the SP mode, do SP5801, and press the number for the item that you want to
initialize.
No. What It Initializes
1 All Clear
2 Engine Clear
3 SCS
4 IMH Memory Clear
5 MCS
6 Copier application
7 Fax application
8 Printer application
SM
Comments
Initializes items 2 to 12 below.
Initializes all registration settings for the engine
and process settings.
(System Control Service)/SRAM. Initializes default
system settings, CSS settings, operation display
coordinates, and ROM update information.
Initializes the image file system.
(IMH: Image Memory Handler)
(Memory Control Service). Initializes the automatic
delete time setting for stored documents.
Initializes all copier application settings.
Initializes the fax reset time, job login ID, all TX/RX
settings, local storage file numbers, and off-hook
timer.
Initializes the printer defaults, programs
registered, the printer SP bit switches, and the
5-8 D017/D018/D019/D020/D084/D085