Ricoh D017 Service Manual page 900

Bit Switches - 1
No Function
Conditions for printing the
protocol dump list
6 0: Print for all communications
1: Print only when there is a
communication error
Priority given to various types of
remote terminal ID when
printing reports
7 0: RTI > CSI > Dial label > Tel.
number
1: Dial label > Tel. number > RTI
> CSI
D361/D510
System Switch 09 (SP No. 1-101-010)
This switch becomes effective only when
system switch 00 bit 6 is set to 1.
1: Set this bit to 1 when you wish to print a
protocol dump list only for communications with
errors.
This bit determines which set of priorities the
machine uses when listing remote terminal
names on reports.
Dial Label: The name stored, by the user, for
the Quick/Speed Dial number.
82
Comments
SM