Ricoh D017 Service Manual page 557

System SP Tables-5
Fill Addr Acl Info.
This SP must be executed immediately after installation of an HDD unit in a
basic machine that previously had no HDD. The first time the machine is
powered on with the new HDD installed, the system automatically takes the
address book from the NVRAM and writes it onto the new HDD. However, the
new address book on the HDD can be accessed only by the system
administrator at this stage. Executing this SP by the service technician
immediately after power on grants full address book access to all users.
41
Procedure
1. Turn the machine off.
2. Install the new HDD.
3. Turn the machine on.
4. The address book and its initial data are created on the HDD
automatically. However, at this point the address book can be accessed
by only the system administrator or key operator.
5. Enter the SP mode and do SP5846 041. After this SP executes
successfully, any user can access the address book.
43 Addr Book Media
46 Initialize All Settings & Addr Book
Initialize Local Address Book
47
Clears all of the address information from the local address book of a
machine managed with UCS.
Initialize Delivery Addr Book
48
Push [Execute] to delete all items (this does not include user codes) in the
delivery address book that is controlled by UCS.
Initialize LDAP Addr Book
49
Push [Execute] to delete all items (this does not include user codes) in the
LDAP address book that is controlled by UCS.
D017/D018/D019/D020/D084/D085 4-124 SM Appendix