Ricoh D017 Service Manual page 856

Error Codes
Code Meaning
15-15 Mail Divide Error
15-16 Mail Size Receive Error
15-17 Receive Timeout
Incomplete Mail
15-18
Received
Final Destination for
15-31 Transfer Request
Reception Format Error
Send/Delivery
15-39
Destination Error
15-41 SMTP Receive Error
15-42 Off Ramp Gateway Error
15-43 Address Format Error
15-44 Addresses Over
Attachment File Format
15-61
Error
D361/D510
Suggested Cause/Action
The e-mail is not in standard format. There is no
boundary between parts of the e-mail, including
the header.
The mail cannot be received because it is too
large.
May occur during manual receiving only because
the network is not operating correctly.
Only one portion of the mail was received.
The format of the final destination for the transfer
request was incorrect.
The transmission cannot be delivered to the final
destination:
Destination file format is incorrect.
Could not create the destination for the file
transmission.
Reception rejected because the transaction
exceeded the limit for the "Auth. E-mail RX"
setting.
The delivery destination address was specified
with Off Ramp Gateway OFF.
Format error in the address of the Off Ramp
Gateway.
The number of addresses for the Off Ramp
Gateway exceeded the limit of 30.
The attached file is not TIFF format.
38 SM