Registration Sensor - Ricoh D017 Service Manual

4.8.10 REGISTRATION SENSOR

1. Open the right cover of the optional paper tray unit or LCT.
2. Open the right cover [A].
3. Release the rear link [B] from the right cover (
4. Release the front link [C] from the mainframe.
5. Remove the right cover [D].
If the duplex unit is installed:
6. Disconnect the right hinge [A] (
7. Remove the connector cap [B] (
8. Disconnect the duplex unit harness [C] (
D017/D018/D019/D020/D084/D085
x 1).
x1)
x1).
x1).
4-53
Paper Feed
SM