G3 Interface Installation - Ricoh D017 Service Manual

Installation

G3 Interface Installation

1. If the fax unit is already installed in the machine, remove:
Application (plastic) cover (
FCU ( x3)
2. Separate the FCU [A] from its cover [B] (
One G3 Unit
3. Connect the G3 interface unit [A] and CCUIF [B] (edge connector).
Fasten the connected G3/CCUIF to the cover [C].
G3: ( x2)
CCUIF ( x4)
4. Connect the FCU [D] and CCUIF [B] (FFC x1).
5. Reconnect the speaker harness [E] (
D361/D510
x1)
x3, x1).
x1)
14 SM