Ricoh D017 Service Manual page 462

2995* ID Sensor Detection Interval
Warming-up
This SP controls the temperature at which the ID sensor pattern is created
1
after the machine is turned on, or after the machine returns to full operation
from the energy saver or auto off mode.
[0 to 255 / 30 / 1 degree]
Number of Pages
The machine makes an ID sensor pattern after the specified number of
2
prints has been made.
[0 to 999 / 300 / 1 page/step]
3 Job End/Interrupt
Determines when the ID sensor reads the ID sensor pattern.
0: Job End. Read pattern at job end.
1: Interrupt. Read pattern at interval set with SP2995-2, even if the job is not
completed.
SM Appendix 4-29 D017/D018/D019/D020/D084/D085
System SP Tables-2