Ricoh D017 Service Manual page 905

No Function
TTI printing position in the main
0-7
scan direction
System Switch 13 - Not used (do not change these settings)
System Switch 14 - Not used (do not change these settings)
SM
System Switch 12 (SP No. 1-101-019)
TTI: 08 to 92 (BCD) mm
Input even numbers only.
This setting determines the print start position
for the TTI from the left edge of the paper. If the
TTI is moved too far to the right, it may
overwrite the file number which is on the top
right of the page. On an A4 page, if the TTI is
moved over by more than 50 mm, it may
overwrite the page number.
87
Bit Switches - 1
Comments
D361/D510